Home >
Bonsai Filtration & Manufacturing
Bonsai Filtration and Manufacturing
Bonsai builds laminar flow hoods, fan filter units and replacement HEPA filters for mushroom labs of every size. Every Bonsai hood, FFU and filter uses H14 HEPA media rated 99.995% at 0.3 micron, and the hoods are built in the USA.
Assembled Bonsai hoods carry a 3-year motor warranty. Compare every size in flow hoods, and keep your filter on schedule with the Lab Guard particle meter.
Products 1-12 of 20
Show
Availability: In Stock
Item #: FL1B -
This bundle pairs the Bonsai HEPAFLOW-12C personal laminar flow hood with a second 12" x 12" H14 HEPA filter, so you have a spare on the shelf the day your first filter is due. Same hood, same performance, no waiting on a replacement order when it's time to swap. The hood pushes air from a 135 CFM blower through an H14 HEPA filter at more than 200 feet per minute, giving you a clean curtain of air for agar, syringes and grain work on a desk-sized footprint. 2 filtersInstalled + spare H14...
Availability: In Stock
Item #: FL9 -
The Bonsai HEPAFLOW-12C is a personal laminar flow hood: a compact cabinet that blows a steady curtain of HEPA-filtered air across your work, so agar, syringes and grain stay clean while they're open. It's the hood most home growers start with, and the one that usually ends the cycle of contaminated jars that comes with working in open air. A 135 CFM blower pushes air through a 12" x 12" H14 HEPA filter at more than 200 feet per minute. The whole unit sits on a desk or shelf and goes together...
Availability: In Stock
Item #: FLX -
The Bonsai XL 2.0 is the step up from a personal hood: a benchtop laminar flow hood with a 24" x 18" H14 HEPA filter that puts three times the clean area of a 12" x 12" unit in front of you. That's enough room to lay out a full set of agar plates, work a row of grain jars or share the bench with a second person. It ships flat with pre-finished, machine-cut panels and Turn-N-Click fasteners, so it goes together in about 15 minutes without tools. H14 HEPA99.995% at 0.3 micron 24" x 18"Filter...
Availability: Out of Stock
Item #: FFU2 -
The Bonsai 2' x 2' fan filter unit is the compact way to get HEPA-filtered air over your bench. It's the smallest FFU in the Bonsai lineup, sized for home labs and growers moving up from a still air box, and it delivers ISO Class 5 clean air without the footprint of a full cabinet hood. Every Bonsai fan filter unit pairs a true H14 HEPA filter with a backward-curved aluminum blower, a washable magnetic pre-filter and a 20-gauge powder-coated steel housing. It plugs into a standard 120V outlet...
Availability: Out of Stock
Item #: FFU3 -
The Bonsai 3' x 2' fan filter unit is the middle of the Bonsai FFU lineup: a 3' wide curtain of HEPA-filtered air for grain transfers, agar and inoculation, in the same slim 14" deep housing as the 2' x 2'. Every Bonsai fan filter unit pairs a true H14 HEPA filter with a backward-curved aluminum blower, a washable magnetic pre-filter and a 20-gauge powder-coated steel housing. It plugs into a standard 120V outlet and sits on an ordinary table, since the housing is only 14" deep. 3' x 2'Filter...
Availability: Out of Stock
Item #: FFU4 -
The Bonsai 4' x 2' fan filter unit is the largest FFU Bonsai makes, with the widest clean-air work area in the lineup and enough airflow, up to 160 FPM, to pressurize a small clean room or grow space with HEPA-filtered air. Every Bonsai fan filter unit pairs a true H14 HEPA filter with a backward-curved aluminum blower, a washable magnetic pre-filter and a 20-gauge powder-coated steel housing. It plugs into a standard 120V outlet and sits on an ordinary table, since the housing is only 14"...
Availability: In Stock
Item #: FLC -
The Commercial Series is Bonsai's flagship 4' x 2' horizontal laminar flow hood, built for labs that have outgrown a still air box or a smaller hood. A 48" x 24" H14 HEPA filter pushes a wide, even curtain of clean air across the bench, so you can run grain-to-grain transfers, pour agar and work two people side by side. Bonsai has built over 4,000 flow hoods since 2019, including custom units for research labs. Each Commercial Series hood leaves the shop 99% assembled and wired by a certified...
Availability: Out of Stock
Item #: FL7 -
A laminar flow hood is really two parts: a HEPA filter and a blower sized to push air through it evenly. The cabinet around them is just a box. This kit gives you the two hard parts from Bonsai, a 24" x 18" H14 HEPA filter and a matched centrifugal blower, so you can build an XL hood that fits your space and your budget. Choose the blower and filter bundle for a complete build, or the blower only if you already have a filter. The blower comes pre-wired with a power cord and in-line switch, so...
Availability: In Stock
Item #: FL3D -
The Bonsai Mini 3D risers started in our own lab, made to ease wrist strain during long agar transfer sessions. Techs quickly started using them to hold petri dishes, liquid culture lids, syringes and scalpels up in the clean airflow, and they became a flow hood staple. The set includes both sizes: a single-plate riser and a dual-plate riser, 3D printed locally by Bonsai in dual-color PLA. 2 risersPer set 4.1"Single, round 8.2" x 4.1"Dual riser 2.7"Tall PLALocally 3D printed Why growers use...
Availability: In Stock
Item #: FLSR -
Work sitting flat on the bench is at the bottom edge of a flow hood's clean airflow. This stainless steel riser lifts your plates, jars and tools 2 inches up into the clean air zone, so your work sits squarely in the filtered air. The set includes two 12" food-grade stainless steel risers and joining clips. Use one on its own, or clip both together into a 24" platform when you need more room. Stainless steel is easy to disinfect between sessions and stands up to alcohol, heat and daily use. 2...
Availability: In Stock
Item #: BLG1 -
You can't see whether a flow hood is doing its job. The Bonsai Lab Guard gives you a number instead of a guess: a laser particle sensor that counts particles down to 0.3 micron and shows PM1.0, PM2.5 and PM10 live, along with temperature and humidity. Hold it in the air coming off your filter and you'll know in seconds whether that air is clean. 0.3 micronSmallest particle PM1.0 / 2.5 / 10Read together Temp + RHAlso displayed 6 levelsColor-coded USB-CPowered What it does in a mushroom lab...
Availability: In Stock
Item #: SL12 -
Spawn bags are made from thick polypropylene, and most budget sealers can't fuse it cleanly. The seal comes out thin or spotty and can split open when the bag is moved. The Bonsai PFS-300 was built for exactly this job: a 400-watt sealer with a pure copper transformer and a wide 8mm seal wire that lays one solid band of fused plastic across the full 12" jaw. It's an impulse sealer, so the wire only heats while you hold the arm down. There's no warm-up and nothing stays hot between bags....