Mushroom Growing Supplies

A standard liquid culture jar breathes passively through a filter disc, and oxygen runs short just as the mycelium needs it most. That's when cultures harden into dense clumps that clog the needle and inoculate unevenly. Active Air fixes that by pushing sterile, filtered air into the jar on a timer, so the mycelium stays fine, fluid and suspended. It's a shippable version of the bubbling setup we've run in our own lab for years, built from high-temperature parts that sterilize and reuse. 28...

A single spore syringe only reaches so far on its own. Put 3-5 cc of it into this jar of sterile nutrient broth, and within days you have a jar of living mycelium big enough to inoculate up to 20 spawn bags or 84 half-pint jars, colonizing grain faster than spores alone. 10 ozCulture broth 3-5 ccTo inoculate 4-5 daysTo visible growth 20+Spawn bags 50 ccSyringe included Why run liquid culture Spores have to germinate before they do anything, and inside a bag of grain that delay gives...

Same system as our Premium kit, almost three times the volume. 28 oz of pressure-sterilized broth in a 32 oz glass jar turns one spore syringe into enough living mycelium for 40+ spawn bags or 160 half-pint jars. It is the size to move up to when a pint jar can no longer keep pace with your grows. 28 ozCulture broth 3-5 ccTo inoculate 4-5 daysTo visible growth 40+Spawn bags 60 ccSyringe included Why growers size up to the XL One syringe, a whole run: a single spore syringe covers 40 or more...

Give your spores a small, sterile place to wake up before they ever touch grain. Each QuickCulture Mini jar holds 30 ml of nutrient broth behind a medical-style injection port. Inject a few cc of spores, let the mycelium grow out, and you will know within days whether you have a clean, healthy culture to work with. Start spores in a jar, not in your grain. Three pre-filled, sterilized 30 ml jars with self-healing ports, plus a 20 cc syringe, a draw needle, a vent needle and alcohol pads....

The dual-spectrum LED bulb from our lighting kit, sold on its own for growers who already have an E26/E27 fixture, such as a lamp, clip light or work light, and just need the right bulb. It alternates 6350K diodes to encourage pinning with 5000K diodes for a natural daylight rhythm, and puts out about 900 lumens from just 15 watts. 6350K + 5000KDual spectrum 900 lmLight output 15WActual draw 48LED diodes E26/E27Base Why growers use this bulb Made for mushroomsAlternating 6350K diodes encourage...

A heater for indoor greenhouses and Martha tents that also raises humidity. A 200W light-free infrared element warms the tent, a small fan spreads the heat to even out hot spots, and a water-filled lava rock tray gives off moisture as it warms, the way water does on sauna stones. Set the heat with the built-in slide dimmer. It is a good fix for basements, garages and winter grows where the room is too cool for mushrooms to fruit well. 200WInfrared, no light 5WCirculation fan DimmerAdjustable...

A 4 or 5 tier indoor greenhouse for incubating and fruiting mushrooms. Powder-coated steel shelves hold up to 50 lb each, the clear zippered cover holds in humidity, and the frame snaps together in minutes with no tools. It is the classic starting point for a home fruiting chamber. Add a humidifier, some light and a way to move fresh air, and you have a vertical fruiting room in about the floor space of a small bookshelf. 4 or 5Tiers 50 lbPer shelf 27.6" x 19"Footprint 63" / 75"Height No...

Five PTFE-coated magnetic stir bars, each 30 x 7 mm, with a raised center pivot ring. The ring lets the bar spin on a small contact point instead of dragging its whole length across the bottom of your jar. Put one in each liquid culture jar before you sterilize it, then spin the culture on a stir plate or with an external magnet. The PTFE coating is non-stick, non-reactive and rated from -196°C to 250°C, comfortably above pressure cooker temperatures. 5-packPTFE coatedCenter pivot...

This magnetic stir plate spins liquid culture and lab solutions anywhere from 350 to 4000 RPM on a brushless DC motor, with a stepless dial so you can set exactly the speed you want. It stirs up to 2000 ml and comes with a stir bar, so it is ready to run out of the box. Keeping liquid culture moving breaks up the mycelium and keeps it evenly suspended, which means every syringe you draw carries about the same amount of culture. 350-4000 RPMUp to 2000 mlBrushless motorStir bar included 4000Max...

Six Microppose adhesive filter disks for monotubs and any bulk-style fruiting chamber. Each 2.5" disk covers a vent hole up to 2.25" across with a full ring of 3M adhesive around it. Peel, press and you have the same filtered air exchange on every hole, every grow, instead of hand-stuffed polyfil. 6Disks per pack 2.5"Disk diameter 2.25"Max hole size 3MAdhesive backing ReusableClean and reapply Why growers switch from polyfil Repeatable airflow Every hole gets the same filter media, so fresh...

Mushrooms do not photosynthesize, but they need a light cue to start fruiting, keep stems growing straight and form normal caps. This kit pairs a dual-spectrum LED bulb with a universal socket adapter, so you can light a monotub, tote or tent with no fixture required. Plug the adapter into any outlet or extension cord, screw in the bulb, and you have low-heat light over your grow in minutes. 6350K + 5000KDual spectrum 900 lmLight output 15WActual draw 360 degCoverage AdapterIncluded Why...

A single bulb covers one tub. This set puts 16.4 ft of seamless COB LED lighting anywhere you need it, across shelving racks, greenhouses or a row of tubs, with a peel-and-stick install. It is IP65 water resistant for humid grow spaces, runs with low heat so it will not dry out an enclosed space, and comes with a 110V power supply that plugs straight in. 16.4 ft5 meters 1200 lm/mLight output COBSeamless LED IP65Water resistant 110/120VPower supply included Why growers use strip lighting Covers...

A dehydrator built around the one problem general-purpose units don't solve: tray height. Our custom-molded trays are extra tall, and the top tray is double height, so you can dry large fruits whole instead of slicing them to fit. A 350W conductive heater and 360° airflow keep the temperature even at the low settings mushrooms need. 350WConductive heater 95–165°FAdjustable 5 traysExtra-tall 2.5"+Top tray depth 1 yearWarranty Why growers use this dehydrator Dry fruits whole Standard trays are...

Myco Labs Eco-Cleanse is a non-toxic, odor-free cleaning concentrate made for mycology. Use it to wipe down still air boxes, work surfaces and grow areas without harsh fumes or residue that can interfere with your cultures. Because it is a concentrate, you mix only what you need at the strength the job calls for. A 2 oz bottle makes up to 64 oz of ready-to-use spray. Choose the 2 oz, 8 oz or 32 oz size. 2 / 8 / 32 ozBottle sizes Up to 32xDilution Non-toxicFormula Odor-freeNo fumes...

These are ready-to-use malt extract agar (MEA) plates, five to a pack, for germinating spores, cleaning up cultures and making first transfers. Each plate is machine-filled with 20 mL of agar in a 90 x 15mm dish, then sealed and shipped fresh. We make every batch in our clean room. A media-prep machine mixes and sterilizes the agar for 30 minutes at 18 PSI, a dispensing machine fills each plate to the same level as it passes under UV-C light, and every plate is capped and laser-labeled....

The Myco Lid Pro is our reusable liquid culture lid for standard wide-mouth mason jars. Instead of punching a needle through the same self-healing port over and over, you draw culture through a dedicated Luer Lock port, while a 0.45 micron syringe filter handles gas exchange. The lid stays on the jar from sterilization to the last syringe. The body is autoclavable Delrin (POM), the gasket rotates independently so the seal seats without twisting, and a raised pad on top gives you a clean place...

Harvesting scissors built for working inside a tub. The MycoEdge has a 10" reach, so you cut from the rim instead of putting your hand and forearm into the fruiting chamber, and a narrow tip that slides between stems in a tight cluster to cut right where the stem meets the casing. The set comes with 2 spare carbon steel blades and a second set of blade holders, so a dull edge or a broken holder never costs you a harvest. 10"Overall length Carbon steelBlades 2 sparesBlades included Spare...

MycoSense is a mushroom research and identification kit for foragers and the curious. It pairs an illustrated field guide to common North American mushrooms with a magnifier, sterile swabs for spore collection and a simple identification guide. It also includes one Miraculix PSILO-QTEST, a rapid home test developed in Germany that indicates whether psilocybin is present in a mushroom sample and roughly how much. The test is also sold on its own; choose when adding to your cart. Field...

Black MEA plates are malt extract agar infused with activated carbon, so white and light-colored mycelium stands out sharply against a deep black surface. The contrast makes it far easier to read growth edges, sectors and pigmentation, and to catch contamination early. Every plate is made in our clean room. A media-prep machine mixes the agar and sterilizes it for 30 minutes at 18 PSI, a dispensing machine fills each 90 x 15mm dish with exactly 20 mL as it passes under UV-C light, and every...

These are ready-to-use malt extract agar (MEA) plates, ten to a pack, for germinating spores, cleaning up cultures and making first transfers. Ten plates cover a full round of work: spores or LC on the first plates, then clean transfers onto the rest. Each plate is machine-filled with 20 mL of agar in a 90 x 15mm dish, then sealed and shipped fresh. We make every batch in our clean room. A media-prep machine mixes and sterilizes the agar for 30 minutes at 18 PSI, a dispensing machine fills...

Rapid Rhizo plates use a custom nutrient and yeast blend that pushes mycelium into fast, rhizomorphic growth, so your strongest genetics are easy to spot and cut. Ten plates cover a full round of clean-up and selection transfers. Every plate is made in our clean room. A media-prep machine mixes the agar and sterilizes it for 30 minutes at 18 PSI, a dispensing machine fills each 90 x 15mm dish with exactly 20 mL as it passes under UV-C light, and every plate is capped, laser-labeled and sealed...

Rapid Rhizo plates use a custom nutrient and yeast blend that pushes mycelium into fast, rhizomorphic growth, so your strongest genetics are easy to spot and cut. This 5-pack is the right size for trying Rapid Rhizo or finishing a handful of isolations. Every plate is made in our clean room. A media-prep machine mixes the agar and sterilizes it for 30 minutes at 18 PSI, a dispensing machine fills each 90 x 15mm dish with exactly 20 mL as it passes under UV-C light, and every plate is capped,...

The Canopy Cutter is a monotub harvesting tool that slides under a dense canopy and cuts mushrooms cleanly at the base. The 8" curved handle gives you reach without lifting the tub or forcing your hand inside, and the carbide blade slices through stems instead of pulling them out of the casing. A clean cut at the surface leaves no divots or torn-up casing, so the substrate is ready to rehydrate for the next flush. A blade cover is included for safe storage between harvests. 8"Curved handle...

Make your own capsules at home in minutes. This manual capsule machine fills 24 size 00 capsules at a time, then joins and ejects them for you, which is faster and cleaner than filling by hand. It is made of strong ABS and Delrin plastic, is dishwasher safe and comes with a tamping tool. 24Capsules per batch Size 00Capsules AutoJoins and ejects TamperIncluded DishwasherSafe Why people use a capsule machine FastFill a batch of 24 in a couple of minutes. CleanLess spilled powder and fewer...